Mr Quyen - Santiago. Posted 14/11/2026

In Luanda's heat and humid sea air, a Santiago ASA/PVC tile sheet (telha pvc) gives a house a tiled look at about 5.4 kg per m² and has no metal to rust. In Santiago tests the space under it stays 6 – 8 °C cooler than under bare metal sheet such as chapa de zinco, and rain noise is about 80% lower. A 14 × 10 m single-storey house takes 32 sheets of 5.694 m, and 25 such houses use about 4,555 m of sheet, most of one 40 ft container.

Man on an orange tile roof holding a Santiago banner, Vietnam

Man on an orange tile roof holding a Santiago banner, Vietnam

 

What goes wrong with chapa de zinco on a house in Luanda?

 

Most owners in Luanda know the zinc roof well, because so many houses have one. It is quick to put up and it keeps the rain out when it is new. The complaints come later. In the afternoon the rooms under it get hot, and the ceiling gives back the heat into the evening. When a storm hits in the rainy season, the noise on the sheet can drown out the television. Near the sea, from the Ilha to the southern beaches, salt in the air starts rust at the laps, along the eaves and around every screw hole.

People who search for "telha pvc" or "telha colonial pvc" in Angola are usually after three things at once: a cooler, quieter house, a roof that will not rust, and the look of a tiled roof on a new vivenda or condominium. The Santiago tile sheet is made for that job. It is not the answer to every roof, and a later section says where zinc still makes sense.

 

Telha pvc or chapa de zinco: how do they compare?

 

PointChapa de zinco (bare metal sheet)Santiago telha pvc (ASA/PVC tile sheet)
Heat in the roomsHot under the sheet in the afternoon6 – 8 °C cooler under the roof than bare metal sheet (Santiago test)
Rain noiseLoud in heavy rainAbout 80% lower than metal (Santiago test)
Salt airRust starts at laps, eaves and screw holesNo metal in the sheet, nothing to rust; ASA cap over every screw head
LookPlain wavesSpanish-style tile profile in long sheets
ColourDepends on the coatingColour in the ASA top layer: no change after 2,000 hours of artificial UV, rated 30 years
WeightLightLight: about 5.4 kg per m² of roof at 2.5 mm
FrameIts own purlin rulesPurlins less than 700 mm apart (440 or 660 mm), slope 20 – 45%

The tile sheet has four co-extruded layers with no glue: an ASA top layer that carries the colour and blocks UV, a virgin PVC layer, a PVC core and a milky-white PVC base that faces the room. The material is virgin, not recycled. Each sheet is 1.05 m wide, covers 0.96 m after the side lap, and is cut to order in 219 mm tile steps, so one sheet runs from ridge to eave. Thickness is 2.5 or 3.0 mm; 2.5 mm is the minimum on a roof. Bending strength is above 1,000 N, real roofs last 25 – 30 years, and the warranty is 10 years for 2.5 mm and thicker sheet installed as Santiago recommends.

 

How many sheets for a house in Luanda? A worked example

 

Take a single-storey vivenda of 14 × 10 m with a gable roof. The ridge runs along the 14 m side, the slope is 25% (about 14°), the eaves overhang 0.5 m to keep rain off the walls, and each gable end overhangs 0.3 m.

StepWorkingResult
Ridge height above the eave line5.0 m half-width × 25%1.25 m
Face length along the slope(5.0 m + 0.5 m) × 1.031about 5.67 m
Sheet length5.67 ÷ 0.219 = 25.9, round up to 26 steps; 26 × 219 mm5.694 m
Sheets per face(14 m + 2 × 0.3 m) ÷ 0.96 = 15.2, round up16 sheets, covering 15.36 m
Sheets for the roof16 × 2 faces32 sheets, about 182 running metres
Roof area15.36 m × 5.694 m × 2about 175 m²
Screw sets with ASA caps175 m² × 4 – 5 per m²about 700 – 875
Ridge and eavesRidge length and both eaves15.36 m of ridge cap, 2 ridge terminals, 2 × 15.36 m of eave drip tile
Sheet weight175 m² × 5.4 kgabout 945 kg

 

Ordering for a condominium: 25 houses in one container

 

Condominium builders around Luanda often put up the same house type again and again, and that suits a factory order well. The export minimum is one 40 ft container of about 5,000 m of sheet, with colours, profiles and accessories mixed. Using the house above:

ItemOne house25 houses
Tile sheets of 5.694 m32 sheets, about 182 m800 sheets, about 4,555 m
Roof areaabout 175 m²about 4,370 m²
Screw sets with ASA caps700 – 87517,500 – 21,875
Ridge cap15.36 m384 m
Ridge terminals250
Eave drip tile30.72 m768 m
Sheet weightabout 945 kgabout 23.6 t

That leaves roughly 445 m of the container for a guard house, garages or spare sheets, in the same colour or a second one. Production takes about 5 days after the order is confirmed, and the price is quoted per order in writing. A builder who needs fewer houses usually buys through an Angolan reseller who imports by the container; our guide for importers in Luanda and Lobito covers that side.

Installers on a narrow grey tile roof, Vietnam

Installers on a narrow grey tile roof, Vietnam

 

Which colour and which accessories?

 

Five colours are standard: dark grey, red, blue, orange and chocolate. Green, white and purple are made to order, and so is a dark underside. In a condominium, one colour for every roof looks tidy; some developers use two, for example red and chocolate on alternate rows. Choose from a real sample held against the wall paint in daylight. Samples are free; the buyer pays the courier.

  • Ridge cap along the top ridge, and hip (diagonal) ridge on hip roofs
  • Ridge terminal at each end of a ridge
  • Three-way and four-way pieces where ridges meet
  • Eave drip tile along the lower edge, where the water runs off
  • Side wall flashing, left and right, where the sheets run along a wall
  • Vertical wall flashing where the sheets run into a wall at the top of a slope
  • ASA screw caps, one on every screw

All of them come in the same colours as the sheets, so a garage roof against the house wall or a porch roof gets the right piece in the right colour from the same container.

 

What does the builder still decide?

 

The fixing rules are short: purlins less than 700 mm apart (440 or 660 mm for the tile sheet, one under the foot of each tile step), the top purlin 15 – 18 cm below the ridge, a slope between 20% and 45%, 6 mm pre-drilled holes, 70 mm screws with ASA caps through the top of the wave over a purlin, 4 – 5 sets per m², never in the valley, and a one-wave side lap. Santiago supplies the sheets and accessories and sends installation videos; it does not install.

Santiago publishes no wind or fire rating for the sheet and holds no Angolan certification. The builder or engineer designs the frame and fixings for the site, and the local authority decides on any approval. What Santiago supplies is the factory's ISO 9001:2015 certificate ICI-23087.D, Quatest test results and a quality certificate (CQ) with every lot.

 

When is chapa de zinco still the practical choice?

 

On a roof flatter than 20% the tile sheet is not recommended, because water needs the slope to run off. For a small temporary shed where heat, noise and looks do not matter, zinc is often the simpler buy, and a single small job does not justify importing a container. Where the tile sheet earns its place is on rooms people live in, near the sea, and on houses where the roof is part of what the buyer pays for.

Why are bare metal roofs hot and loud, and what changes with a tile sheet?

Mr Quyen holds a white tile sheet in the Santiago factory in Vietnam and explains in English, with captions, why bare metal roofs are hot, noisy in rain and costly to repair. The short then moves to a red tile roof on a house and a finished grey tile roof beside the gutter.

Heat and rain noise: Santiago ASA/uPVC roofing explained (Santiago video on YouTube).

More short videos from Santiago

Both clips below come from Santiago's own YouTube channel and were filmed at the factory in Vietnam or on Santiago roofs.

How does the sheet behave under strong heat?

The heat-test short: grey and red sheets under a flame, Mr Quyen on grey sheets at the factory, then a warehouse roof re-laid in blue. It shows how the sheet behaves under heat in a demonstration; it is not a certified fire rating.

Heat test and a warehouse re-roof with uPVC sheets (Santiago video on YouTube).

What does a finished tile-sheet roof look like on site?

Mr Quyen shows a green ASA/PVC sheet in the Santiago factory, then climbs onto a grey tile-profile roof that installers are still screwing down. Near the end he and a colleague walk along a finished grey tile roof next to the gutter.

Santiago uPVC tile roofs on site (Santiago video on YouTube).

Santiago – a leading exporter of ASA/PVC roofing from Vietnam

Santiago roofing is produced and loaded into containers at our factory in Vietnam. It has been exported to India since 2023, Thailand since 2024 and the USA since 2025. Every export shipment comes with a commercial invoice, packing list, bill of lading and a certificate of origin (C/O) issued by Vietnam's Ministry of Industry and Trade, which importers use to claim the duty preference of their trade agreement.

ItemDetails
HS code3925.90.00 (ASA/PVC roofing sheets)
Certificate of originForm D (ASEAN), Form AI (India), Form AK / VK (Korea), Form AJ / VJ (Japan), Form VC (Chile), CPTPP proof of origin
Shipped fromVietnam, by container

Certificate of origin Form AI (ASEAN–India) for Santiago ASA/PVC roofing sheets, HS 39259000, certified on 24 September 2026. Buyer details are hidden.

Certificate of origin Form AI (ASEAN–India) for Santiago ASA/PVC roofing sheets, HS 39259000, certified on 24 September 2026. Buyer details are hidden.

The Santiago team beside a loaded export container at the factory, November 2024

The Santiago team beside a loaded export container at the factory, November 2024

Loading Santiago roof tiles into an export container

Loading Santiago roof tiles into an export container

 

Frequently asked questions

 

Is telha pvc cooler than chapa de zinco?

In Santiago tests the space under the ASA/PVC tile sheet stays 6 – 8 °C cooler than under bare metal sheet, and rain noise is about 80% lower.

 

Does telha pvc rust in Luanda's sea air?

No. There is no metal in the sheet. Every screw head is covered with an ASA cap, and the screws go through the top of the wave, never in the valley.

 

How many sheets does a 14 × 10 m house need?

With a 25% gable roof, 0.5 m eaves and 0.3 m gable overhangs: 32 sheets of 5.694 m (about 182 m), 700 – 875 screw sets, 15.36 m of ridge cap and 2 ridge terminals.

 

Can a whole condominium be supplied in one container?

About 25 houses of that size use 4,555 m of sheet, which fits in one 40 ft container of about 5,000 m together with the accessories.

 

Does the tile sheet have a wind rating or Angolan approval?

No. Santiago publishes no wind or fire rating and holds no Angolan certification. The builder or engineer designs the fixing, and the local authority decides on approval.

 

Read more

 


 

Versão em português

 

Em Luanda, com calor, humidade e maresia, a telha pvc da Santiago (telha ASA/PVC) dá à casa o aspeto de um telhado de telha, pesa cerca de 5,4 kg por m² e não tem metal para enferrujar. Nos testes da Santiago, o espaço por baixo fica 6 – 8 °C mais fresco do que debaixo de chapa metálica simples, como a chapa de zinco, e o barulho da chuva baixa cerca de 80%. Uma vivenda térrea de 14 × 10 m leva 32 telhas de 5,694 m.

 

Chapa de zinco ou telha pvc: qual a melhor chapa para telhado em Luanda?

 

A chapa de zinco põe-se depressa e, nova, não deixa passar a chuva. Os problemas aparecem depois: à tarde a casa aquece, na época das chuvas o barulho no telhado não deixa conversar, e junto ao mar a maresia começa a ferrugem nas sobreposições, no beiral e à volta de cada parafuso. A telha pvc da Santiago é feita no Vietname com quatro camadas coextrudidas, sem cola: uma camada superior de ASA, que leva a cor e trava o UV, uma camada de PVC virgem, um núcleo de PVC e uma base de PVC branco-leitoso. O material é virgem, não reciclado, e não tem metal.

PontoChapa de zincoTelha pvc Santiago
Calor dentro de casaQuente à tarde6 – 8 °C mais fresco do que chapa metálica simples (teste Santiago)
Barulho da chuvaAltoCerca de 80% mais baixo (teste Santiago)
MaresiaFerrugem nas sobreposições e nos parafusosSem metal; tampa de ASA em cada parafuso
CorDepende do revestimentoSem alteração após 2.000 horas de UV artificial; cor garantida para 30 anos
PesoLeveCerca de 5,4 kg por m² (2,5 mm)
GarantiaConforme o fornecedor10 anos para 2,5 mm ou mais, instalada como a Santiago recomenda

Telhas pvc vermelhas vistas de perto, Vietname

Telhas pvc vermelhas vistas de perto, Vietname

 

Quantas telhas para uma vivenda de 14 × 10 m?

 

Telhado de duas águas, cumeeira ao longo dos 14 m, inclinação de 25% (cerca de 14°), beiral de 0,5 m e 0,3 m de aba em cada empena. Cada telha tem 1,05 m de largura, cobre 0,96 m e é cortada à medida em passos de 219 mm.

CálculoResultado
Comprimento da água: (5,0 m + 0,5 m) × 1,031cerca de 5,67 m
Comprimento da telha: 26 passos × 219 mm5,694 m
Telhas por água: (14 + 0,6) ÷ 0,96 = 15,216 telhas (15,36 m)
Total32 telhas, cerca de 182 m
Área do telhadocerca de 175 m²
Parafusos com tampa de ASA (4 – 5 por m²)cerca de 700 – 875
Cumeeira15,36 m e 2 terminais de cumeeira
Peça de pingadeira do beiral (eave drip tile)2 × 15,36 m
Peso das telhascerca de 945 kg

Para um condomínio de 25 casas iguais são cerca de 4.555 m de telha, quase um contentor de 40 pés inteiro (cerca de 5.000 m), com os acessórios no mesmo contentor. A produção leva cerca de 5 dias depois de o pedido ser confirmado, e o preço é dado por escrito em cada orçamento.

Instaladores num telhado de telha cinzenta vistos de cima, Vietname

Instaladores num telhado de telha cinzenta vistos de cima, Vietname

 

Cores, acessórios e o que o construtor decide

 

Cores normais: cinzento-escuro, vermelho, azul, laranja e chocolate. Verde, branco e roxo por encomenda. Os acessórios vêm nas mesmas cores: cumeeira, cumeeira de espigão (diagonal), terminal de cumeeira, peças de três e de quatro vias, peça de pingadeira do beiral onde a água escorre, rufo lateral esquerdo e direito onde as telhas correm ao longo de uma parede, rufo de parede vertical onde as telhas batem de frente numa parede, e tampas de parafuso em ASA.

Madres a menos de 700 mm (440 ou 660 mm), a madre de cima 15 – 18 cm abaixo da cumeeira, inclinação entre 20% e 45%, furos de 6 mm, parafusos de 70 mm com tampa de ASA sempre no topo da onda sobre a madre, nunca no canal, e sobreposição lateral de uma onda. A Santiago fornece telhas, acessórios e vídeos de instalação, mas não instala. Não publica classificação de vento nem de fogo e não tem certificação angolana: o construtor ou engenheiro dimensiona a estrutura e a fixação, e a autoridade local decide sobre a aprovação.

 

Perguntas frequentes

 

A telha pvc é mais fresca do que a chapa de zinco?

Nos testes da Santiago, o espaço por baixo da telha ASA/PVC fica 6 – 8 °C mais fresco do que debaixo de chapa metálica simples, e o barulho da chuva baixa cerca de 80%.

 

A telha pvc enferruja com a maresia?

Não. A telha não tem metal, e cada parafuso leva uma tampa de ASA no topo da onda.

 

Quantas telhas leva uma vivenda de 14 × 10 m?

Com duas águas a 25%: 32 telhas de 5,694 m (cerca de 182 m), 700 – 875 parafusos com tampa e 15,36 m de cumeeira.

 

Qual é o preço da telha pvc em Angola?

A Santiago não publica preços. O preço é dado por escrito em cada orçamento, conforme a espessura, a cor, os comprimentos, os acessórios e a quantidade.

 

Sources for the figures in this article

  • Profiles, 2.5–3.0 mm thickness and 10-year warranty: Santiago ASA/PVC product specification.
  • About 6–8 °C cooler than bare metal sheet and about 80% less rain noise: Santiago's own comparisons on finished roofs in Vietnam.
  • HS code 3925.90.00: Harmonized System Chapter 39 (builders' ware of plastics), as applied in Vietnam's export tariff.
  • Certificates of origin (Form D, AI, AK/VK, AJ/VJ, VC, CPTPP): issued by Vietnam's Ministry of Industry and Trade under the country's free trade agreements.
  • Minimum order of one 40 ft container (about 5,000 m) and about 5 days for production and loading: Santiago export desk, October 2026.

Updated 03/11/2026. Santiago Import Export Co., Ltd, Vietnam. WhatsApp +84 935 391 495 (Mr. Quyen), hotline +84 965 437 316 (Mrs. Ly), email salessantiagoroofing@gmail.com.