Mr Quyen - Santiago. Posted 14/11/2026

On a house in Maputo, Beira or elsewhere on the coast, a Santiago ASA/PVC tile sheet has no metal for salt air (maresia) to rust, and in Santiago tests the space under it stays 6 – 8 °C cooler than under bare metal sheet, with about 80% less rain noise. It has no cyclone or wind rating, so the builder designs the frame and fixings. A 12 × 8 m single-storey house takes 26 sheets of 4.818 m, about 125 m.

A safety helmet on a red and blue roof, Vietnam

A safety helmet on a red and blue roof, Vietnam

 

What does maresia do to a roof on the coast?

 

Anyone with a house near the sea in Maputo, Beira, Inhambane or Pemba knows maresia: the salty, damp air that leaves a film on windows and cars. On a chapa de zinco roof it does its work slowly, at the laps between sheets, around the screw holes and along the cut edges at the eaves. After some years a rust stain shows on the ceiling, and then the drip.

The Santiago tile sheet has no metal in it, so the sheet has nothing to rust. It is made in Vietnam from four co-extruded layers with no glue: an ASA top layer that carries the colour and blocks UV, a virgin PVC layer, a PVC core and a milky-white PVC base. The screws are the one metal part, and ASA caps cover their heads. Near the sea, ask your builder for screws suited to coastal air as well.

 

Telha PVC or chapa de zinco: how do they compare?

 

PointChapa de zinco (metal sheet)Santiago telha PVC (ASA/PVC tile sheet)
Salt airRust can start at laps, holes and cut edges over the yearsNo metal in the sheet; ASA caps on the screw heads
Heat under the roofHot in the afternoon sun6 – 8 °C cooler than bare metal sheet (Santiago test)
Rain noiseLoud in a downpourAbout 80% lower than metal (Santiago test)
LookWaves or ribsSpanish-style tile profile in five standard colours
Colour in strong sunDepends on the paintASA layer: no colour change after 2,000 hours of artificial UV; colour rated 30 years
WeightDepends on the gaugeAbout 5.4 kg per m² of roof at 2.5 mm
Cyclone or wind ratingAsk the supplier of that productNone published; the builder or engineer designs the fixing

Real roofs last 25 – 30 years, and the warranty is 10 years for 2.5 mm and thicker sheet installed as Santiago recommends. Bending strength is above 1,000 N.

Zinc sheet still makes sense in some places. For a temporary store, a building site shelter or a shed you plan to replace soon, it is a practical choice. The tile sheet is for the house you will live in for a long time and want to look like a tiled roof.

 

Cyclones: what we can say and what we cannot

 

The central and northern coast of Mozambique, Beira included, has been hit hard by cyclones, and every owner there asks the same question: will the roof stay on? We will not answer that with a promise. Santiago publishes no cyclone, wind or impact rating for this sheet and holds no Mozambican certification.

What we can say is this. A light roof does not stay on by its own weight; it stays on because of its frame and its fixings. On a cyclone-exposed site the builder or engineer designs the trusses, the tie-downs, the purlins and the number and type of screws. Santiago's standard of 4 – 5 screw sets per m² is a fixing rule for normal use, not a cyclone design. The local authority decides on any approval.

The parts Santiago's rules cover still matter in a storm: purlins less than 700 mm apart (440 or 660 mm for the tile sheet), the top purlin 15 – 18 cm below the ridge, a slope of 20 – 45%, 6 mm pre-drilled holes, 70 mm screws with ASA caps through the top of the wave over a purlin, never in the valley, and a one-wave side lap.

 

How many sheets for a 12 × 8 m house in Maputo? A worked example

 

Take a single-storey house 12 m long and 8 m wide with a two-slope roof (telhado de 2 águas). The ridge runs along the 12 m side, the slope is 25% (about 14°), the eaves overhang 0.6 m for shade and each gable end overhangs 0.2 m.

StepWorkingResult
Ridge height above the eave line4 m half-width × 25%1.0 m
Face length along the slope(4 m + 0.6 m) × 1.0308about 4.74 m
Sheet length4.74 ÷ 0.219 = 21.7, round up to 22 steps; 22 × 219 mm4.818 m (the extra 8 cm goes into the eave)
Sheets per face(12 m + 2 × 0.2 m) ÷ 0.96 = 12.9, round up13 sheets, covering 12.48 m
Sheets for the roof13 × 2 faces26 sheets, about 125 running metres
Roof area12.48 m × 4.818 m × 2about 120 m²
Screw sets with ASA caps120 m² × 4 – 5 per m²about 480 – 600
Ridge and edgesRidge length and both eaves12.48 m of ridge cap, 2 ridge terminals, 2 × 12.48 m of eave drip tile
Sheet weight120 m² × 5.4 kgabout 650 kg

Each sheet runs in one piece from ridge to eave because it is cut to order in 219 mm steps. On a hip roof (telhado de 4 águas) add hip ridge pieces and a four-way piece where the ridges meet.

Grey tile sheets laid out on a building site, Vietnam

Grey tile sheets laid out on a building site, Vietnam

 

Eaves, walls and colours

 

Along the lower edge, eave drip tile lets the water fall clear into the gutter. If the house has a parapet or joins a neighbour's wall, two pieces are used: side wall flashing (left or right; product name "eave sealing tile") where the sheets run along the wall, parallel to the water flow, and vertical wall flashing where the top of a slope meets a wall. All accessories come in the same colours as the sheets.

The standard colours are dark grey, red, blue, orange and chocolate; green, white and purple are made to order. Red and orange give the classic tiled-roof look; dark grey and chocolate suit modern houses with white walls. Ask for a free sample (you pay the courier) and look at it against your wall in daylight.

 

How do you buy the sheets in Mozambique?

 

Santiago sells for export by the container: the minimum order is one 40 ft container of about 5,000 m of sheet, with colours, profiles and accessories mixed, and production takes about 5 days after the order is confirmed. A house needs about 125 m, so it is supplied through a Mozambican importer, dealer or builder who brings in containers. Our guide for importers using Maputo, Beira or Nacala explains that side.

There is no free-trade agreement between Mozambique and Vietnam that we can confirm, so we promise no duty saving. Santiago issues a certificate of origin (Vietnam) and ships under HS 3925.90.00; your customs broker (despachante) confirms the duty and documents. The price is quoted per order in writing. Santiago supplies sheets and accessories and sends installation videos; it does not install.

How do the tile sheets look on real roofs in sun and rain?

Red ASA/PVC tile sheets are carried up to a house, a flame is put to a stack of sheets, and the short ends on a blue warehouse roof under installation and grey sheets on the factory roller line. A flame test is a demonstration, not a fire rating.

Santiago PVC roofing tiles in real conditions (Santiago video on YouTube).

More short videos from Santiago

Two short clips in English, filmed by Santiago. Tap a video to play it here on the page.

How tough is a 2.5 mm sheet? The truck test

A Santiago delivery truck drives over a blue ASA/PVC tile sheet and a blue corrugated sheet laid on the factory yard in Vietnam. It is a demonstration only; on a roof the sheet still needs purlins less than 700 mm apart.

Truck test on Santiago ASA/PVC sheets (Santiago video on YouTube).

Why are bare metal roofs hot and loud, and what changes with a tile sheet?

Mr Quyen holds a white tile sheet in the Santiago factory in Vietnam and explains in English, with captions, why bare metal roofs are hot, noisy in rain and costly to repair. The short then moves to a red tile roof on a house and a finished grey tile roof beside the gutter.

Heat and rain noise: Santiago ASA/uPVC roofing explained (Santiago video on YouTube).

Santiago – a leading exporter of ASA/PVC roofing from Vietnam

Santiago roofing is produced and loaded into containers at our factory in Vietnam. It has been exported to India since 2023, Thailand since 2024 and the USA since 2025. Every export shipment comes with a commercial invoice, packing list, bill of lading and a certificate of origin (C/O) issued by Vietnam's Ministry of Industry and Trade, which importers use to claim the duty preference of their trade agreement.

ItemDetails
HS code3925.90.00 (ASA/PVC roofing sheets)
Certificate of originForm D (ASEAN), Form AI (India), Form AK / VK (Korea), Form AJ / VJ (Japan), Form VC (Chile), CPTPP proof of origin
Shipped fromVietnam, by container

Certificate of origin Form AI (ASEAN–India) for Santiago ASA/PVC roofing sheets, HS 39259000, certified on 24 September 2026. Buyer details are hidden.

Certificate of origin Form AI (ASEAN–India) for Santiago ASA/PVC roofing sheets, HS 39259000, certified on 24 September 2026. Buyer details are hidden.

The Santiago team beside a loaded export container at the factory, November 2024

The Santiago team beside a loaded export container at the factory, November 2024

Loading Santiago roof tiles into an export container

Loading Santiago roof tiles into an export container

 

Frequently asked questions

 

Does telha PVC rust near the sea?

The sheet has no metal, so salt air cannot rust it. The screws are the only metal part; ASA caps cover their heads, and near the sea your builder should choose screws suited to coastal air.

 

Is telha PVC safe in a cyclone?

Santiago publishes no cyclone or wind rating for the sheet. On exposed sites the builder or engineer designs the frame, tie-downs and fixings, and the local authority decides on approval.

 

Is a PVC roof cooler than chapa de zinco?

In Santiago tests the space under its ASA/PVC tile sheet stays 6 – 8 °C cooler than under bare metal sheet, and rain noise is about 80% lower.

 

How many sheets for a 12 × 8 m house?

With a 25% gable roof, 0.6 m eaves and 0.2 m gable overhangs: 26 sheets of 4.818 m (about 125 m), 480 – 600 screw sets, 12.48 m of ridge cap and 2 ridge terminals.

 

What is the price of telha PVC in Mozambique?

Santiago does not publish prices. It quotes per order in writing, based on thickness, colour, lengths, accessories and quantity.

 

Read more

 


 

Versão em português

 

Numa casa em Maputo, na Beira ou noutro ponto da costa, a telha PVC ASA da Santiago não tem metal, por isso a maresia não a enferruja. Nos testes da Santiago, debaixo dela fica 6 – 8 °C mais fresco do que debaixo de chapa metálica e o barulho da chuva baixa cerca de 80%. Não tem classificação para ciclones: o empreiteiro desenha a estrutura e a fixação. Uma casa de 12 × 8 m leva 26 chapas de 4,818 m.

 

Telha PVC ou chapa de zinco junto ao mar?

 

Quem vive perto do mar conhece bem a maresia. Na chapa de zinco a ferrugem começa devagar, nas sobreposições, à volta dos furos dos parafusos e nos cortes do beiral. A telha PVC da Santiago é feita no Vietname com quatro camadas coextrudidas sem cola: uma camada de ASA que leva a cor e trava os raios UV, PVC virgem, um núcleo de PVC e uma base de PVC branco leitoso. Os parafusos são a única parte metálica e levam tampas de ASA; junto ao mar, peça ao empreiteiro parafusos próprios para zonas costeiras.

PontoChapa de zincoTelha PVC ASA Santiago
MaresiaPode enferrujar com os anosSem metal na chapa
Calor dentro de casaAquece muito ao sol6 – 8 °C mais fresco (teste Santiago)
Barulho da chuvaAltoCerca de 80% mais baixo (teste Santiago)
AspectoOndas ou nervurasTelha colonial, 5 cores normais
Cor ao solDepende da tintaSem alteração após 2.000 horas de UV artificial; cor avaliada para 30 anos
GarantiaDepende do fornecedor10 anos para 2,5 mm ou mais, montada como a Santiago recomenda

Telhas PVC cor de laranja em paletes, Vietname

Telhas PVC cor de laranja em paletes, Vietname

 

E os ciclones?

 

Não fazemos promessas. A Santiago não publica nenhuma classificação para ciclones ou vento e não tem certificação em Moçambique. Um telhado leve não se segura pelo peso: segura-se pela estrutura e pela fixação. Em zonas expostas, é o empreiteiro ou o engenheiro que desenha as asnas, as amarrações, as madres e o número de parafusos. As regras da Santiago (4 – 5 parafusos por m²) servem o uso normal, não substituem esse projecto.

Regras de montagem: madres (terças) a menos de 700 mm (440 ou 660 mm para a telha), a madre de cima a 15 – 18 cm da cumeeira, inclinação entre 20% e 45%, furos de 6 mm, parafusos de 70 mm com tampa de ASA no alto da onda sobre a madre, nunca no canal, e sobreposição lateral de uma onda.

 

Exemplo: casa térrea de 12 × 8 m

 

CálculoResultado
Telhado de 2 águas, inclinação 25%, beiral 0,6 mcomprimento da água cerca de 4,74 m
Comprimento da chapa: 22 passos × 219 mm4,818 m
Chapas por água: (12 + 0,4) ÷ 0,96 = 12,913 chapas (12,48 m)
Total26 chapas, cerca de 125 m
Área do telhadocerca de 120 m²
Parafusos com tampa ASAcerca de 480 – 600
Cumeeira12,48 m e 2 terminais de cumeeira
Telha de beiral (pingadeira)2 × 12,48 m
Peso das chapascerca de 650 kg

Junto a uma platibanda ou à parede do vizinho: rufo lateral de parede, esquerdo ou direito (nome do produto "eave sealing tile"), onde as chapas correm ao longo da parede; rufo de parede vertical onde o topo da água encosta a uma parede. Todos os acessórios vêm na mesma cor das chapas.

Chapas azuis a serem levantadas para o telhado, Vietname

Chapas azuis a serem levantadas para o telhado, Vietname

 

Como comprar em Moçambique

 

A Santiago vende para exportação por contentor de 40 pés (cerca de 5.000 m, cores e perfis misturados), com produção em cerca de 5 dias. Uma casa compra-se através de um importador, revendedor ou empreiteiro que traga contentores. Não conhecemos acordo de comércio livre entre Moçambique e o Vietname: o seu despachante confirma os direitos e os documentos. O preço é dado por escrito para cada encomenda. Amostras grátis; o comprador paga o correio expresso.

 

Perguntas frequentes

 

A telha PVC enferruja com a maresia?

Não. A chapa não tem metal. Só os parafusos são metálicos e levam tampas de ASA.

 

A telha PVC aguenta ciclones?

A Santiago não publica classificação para ciclones nem para vento. O empreiteiro ou engenheiro desenha a estrutura e a fixação, e a autoridade local decide a aprovação.

 

Quantas chapas para uma casa de 12 × 8 m?

Com telhado de 2 águas a 25%: 26 chapas de 4,818 m (cerca de 125 m), 480 – 600 parafusos e 12,48 m de cumeeira.

 

Qual é o preço da telha PVC?

A Santiago não publica preços; faz um orçamento por escrito para cada encomenda.

 

Sources for the figures in this article

  • Profiles, 2.5–3.0 mm thickness and 10-year warranty: Santiago ASA/PVC product specification.
  • About 6–8 °C cooler than bare metal sheet and about 80% less rain noise: Santiago's own comparisons on finished roofs in Vietnam.
  • HS code 3925.90.00: Harmonized System Chapter 39 (builders' ware of plastics), as applied in Vietnam's export tariff.
  • Certificates of origin (Form D, AI, AK/VK, AJ/VJ, VC, CPTPP): issued by Vietnam's Ministry of Industry and Trade under the country's free trade agreements.
  • Minimum order of one 40 ft container (about 5,000 m) and about 5 days for production and loading: Santiago export desk, October 2026.

Updated 03/11/2026. Santiago Import Export Co., Ltd, Vietnam. WhatsApp +84 935 391 495 (Mr. Quyen), hotline +84 965 437 316 (Mrs. Ly), email salessantiagoroofing@gmail.com.