Mr Quyen - Santiago. Posted 14/11/2026
For galeras, poultry houses, pig sheds and storage sheds on Guatemalan fincas, Santiago corrugated ASA/PVC sheet comes in 5-wave (1.00 m cover), 6-wave (0.95 m) and 11-wave (1.00 m). It has no metal to rust in damp animal houses, and in Santiago tests the space under it stays 6 – 8 °C cooler than under bare metal sheet. A 12 × 60 m galera takes about 830 m of 5-wave sheet, with 6 – 12 skylight sheets.

Man working on a blue corrugated roof, Vietnam
Why do metal roofs wear out on poultry and pig houses?
Animal houses are damp, and the air carries ammonia from manure. Together with washing water and the coast's salt air, that is hard on galvanised lámina: rust starts at the screw holes and laps, and after some years the roof drips onto the bedding. Santiago corrugated sheet has no metal in it, so there is nothing to rust. Santiago does not publish a chemical-resistance rating, so for unusual conditions (for example, a disinfectant you spray on the roof) ask for a sample and test it in your own house.
Heat is the other reason. Birds and pigs suffer in a hot galera, and on the coast and in Petén a bare metal roof heats the air under it. In Santiago tests the space under its sheet stayed 6 – 8 °C cooler than under bare metal sheet. Ventilation and the height of the walls still do most of the work; the roof helps.
5, 6 or 11 waves: which sheet for a galera?
| Profile | Full width | Cover width | Wave height | Common use |
|---|---|---|---|---|
| 5-wave | 1.08 m | 1.00 m | 32 mm | Roofs of galeras, poultry houses and storage sheds |
| 6-wave | 1.06 m | 0.95 m | 34 mm | Roofs where a deeper wave is preferred |
| 11-wave | 1.05 m | 1.00 m | 20 mm | Walls, side panels and smaller roofs |
All three come in 2.5 and 3.0 mm; 2.5 mm is the minimum for a roof. A 2.5 mm sheet weighs about 5.2 kg per running metre. Standard colours are dark grey, red, blue, orange and chocolate; green, white and purple are made to order.

Sheets being lifted onto a steel frame, Vietnam
How many sheets for a 12 × 60 m galera? A worked example
A poultry galera 12 m wide and 60 m long, gable roof with the ridge along the 60 m side, slope 25% (about 14°), eaves 0.6 m and 0.3 m overhang at each end. 5-wave sheet, 1.00 m cover.
| Step | Working | Result |
|---|---|---|
| Ridge height above the eave line | 6 m half-width × 25% | 1.50 m |
| Face length along the slope | (6 m + 0.6 m) × 1.031 | about 6.80 m |
| Sheets per face | (60 m + 2 × 0.3 m) ÷ 1.00 = 60.6, round up | 61 sheets |
| Sheets for the roof | 61 × 2 faces | 122 sheets of 6.80 m, about 830 m |
| Roof area | 61 m × 6.80 m × 2 | about 830 m² |
| Skylight sheets (5 – 10% of the roof) | 122 × 5% to 122 × 10% | 6 – 12 sheets in place of PVC sheets |
| Screw sets with ASA caps | 830 m² × 4 – 5 per m² | about 3,320 – 4,150 |
| Ridge cap | Length of the ridge | about 61 m |
| Sheet weight (2.5 mm) | 830 m × 5.2 kg | about 4.3 tonnes |
Agree the sheet lengths with Santiago when you order. 830 m is about a sixth of one 40 ft container (about 5,000 m), so a finca usually buys through a Guatemalan importer, or several farms or a cooperative share a container.
Costaneras, screws and skylights
Costaneras (polines) go less than 700 mm apart, with the top one 15 – 18 cm below the ridge, and the slope stays between 20% and 45%. Pre-drill 6 mm holes, fix 70 mm screws with ASA caps through the top of the wave over a purlin, 4 – 5 sets per m², and never in the valley. Lap each sheet one wave over the next.
Skylight sheets let through 80 – 90% of the light and are usually spread over 5 – 10% of the roof area. Spread them out rather than putting them in one strip, so the light falls evenly.
Santiago supplies the sheets, skylight sheets and accessories and sends installation videos; it does not install. It publishes no wind rating, so the builder designs the frame and fixings. Every lot ships with a quality certificate (CQ) under ISO 9001:2015 certificate ICI-23087.D.
What does a buyer see inside the Santiago factory?
Mr Quyen walks through the Santiago factory in Vietnam and explains it in English: roof tiles and ridge pieces in the yard, a green 5-wave sheet coming off the line, a delivery truck, and the warehouses where a container is being loaded.
Inside the Santiago ASA/PVC roofing factory in Vietnam (Santiago video on YouTube).
More short videos from Santiago
Two more English shorts from the Santiago YouTube channel. Each one is about a minute or less.
How tough is a 2.5 mm sheet? The truck test
A Santiago delivery truck drives over a blue ASA/PVC tile sheet and a blue corrugated sheet laid on the factory yard in Vietnam. It is a demonstration only; on a roof the sheet still needs purlins less than 700 mm apart.
Truck test on Santiago ASA/PVC sheets (Santiago video on YouTube).
How do the tile sheets look on real roofs in sun and rain?
Red ASA/PVC tile sheets are carried up to a house, a flame is put to a stack of sheets, and the short ends on a blue warehouse roof under installation and grey sheets on the factory roller line. A flame test is a demonstration, not a fire rating.
Santiago PVC roofing tiles in real conditions (Santiago video on YouTube).
Santiago – a leading exporter of ASA/PVC roofing from Vietnam
Santiago roofing is produced and loaded into containers at our factory in Vietnam. It has been exported to India since 2023, Thailand since 2024 and the USA since 2025. Every export shipment comes with a commercial invoice, packing list, bill of lading and a certificate of origin (C/O) issued by Vietnam's Ministry of Industry and Trade, which importers use to claim the duty preference of their trade agreement.
| Item | Details |
|---|---|
| HS code | 3925.90.00 (ASA/PVC roofing sheets) |
| Certificate of origin | Form D (ASEAN), Form AI (India), Form AK / VK (Korea), Form AJ / VJ (Japan), Form VC (Chile), CPTPP proof of origin |
| Shipped from | Vietnam, by container |

Certificate of origin Form AI (ASEAN–India) for Santiago ASA/PVC roofing sheets, HS 39259000, certified on 24 September 2026. Buyer details are hidden.

The Santiago team beside a loaded export container at the factory, November 2024

Loading Santiago roof tiles into an export container
Frequently asked questions
Does a PVC roof rust in a poultry or pig house?
No. There is no metal in the sheet, and the screws are covered with ASA caps. Santiago does not publish a chemical-resistance rating, so test a sample if you use strong chemicals on the roof.
Which profile is used for a galera roof?
5-wave (1.08 m wide, 1.00 m cover, 32 mm wave) is a common choice for roofs; 6-wave has a 34 mm wave; 11-wave (20 mm) is often used on walls and side panels.
How many sheets does a 12 × 60 m galera need?
With a 25% gable roof and 0.6 m eaves: 122 sheets of 6.80 m, about 830 m of 5-wave sheet, 6 – 12 of them as skylight sheets, and 3,320 – 4,150 screw sets.
How far apart should the costaneras be?
Less than 700 mm, with the top one 15 – 18 cm below the ridge.
How much light do skylight sheets let through?
80 – 90% of the light. They are usually used on 5 – 10% of the roof area.
Read more
- Roofs for poultry and pig houses
- How many skylight sheets a roof needs
- A rust-free roof with ASA/PVC sheets
- Skylight roofing sheets
- ASA/PVC roofing sheet, 5 square waves
Versión en español
Para galeras, granjas avícolas, porquerizas y bodegas de finca, Santiago fabrica lámina de pvc acanalada ASA/PVC de 5 ondas (1.00 m útil), 6 ondas (0.95 m) y 11 ondas (1.00 m). No tiene metal que se oxide con la humedad de los animales, y en las pruebas de Santiago bajo el techo hace 6 – 8 °C menos que bajo una lámina metálica sin aislar. Una galera de 12 × 60 m lleva unos 830 m de lámina de 5 ondas.
¿Por qué se pica la lámina en las galeras?
En una galera de pollos o en una porqueriza hay humedad, agua de lavado y amoníaco del estiércol, y en la costa además salitre. La lámina galvanizada empieza a oxidarse en los agujeros de los tornillos y en los traslapes, y con los años gotea sobre la cama. La lámina de Santiago no lleva metal. Santiago no publica una clasificación de resistencia química, así que si usa productos fuertes sobre el techo, pruebe antes una muestra.

Láminas acanaladas azules y blancas, Vietnam
Ejemplo: techo para galera de 12 × 60 m
| Cálculo | Resultado |
|---|---|
| Dos aguas, pendiente 25%, alero 0.6 m | Largo del faldón: cerca de 6.80 m |
| Láminas por faldón: (60 + 0.6) ÷ 1.00 | 61 láminas |
| Total | 122 láminas, cerca de 830 m |
| Láminas traslúcidas (5 – 10% del techo) | 6 – 12 láminas |
| Tornillos con capuchón ASA (4 – 5 por m²) | 3,320 – 4,150 juegos |
| Caballete | cerca de 61 m |
| Peso (2.5 mm, 5.2 kg por metro) | cerca de 4.3 toneladas |
830 m es más o menos la sexta parte de un contenedor de 40 pies (unos 5,000 m). Por eso una finca suele comprar a un importador guatemalteco, o varias fincas o una cooperativa se juntan para un contenedor.

Láminas acanaladas verdes apiladas, Vietnam
Costaneras, tornillos y láminas traslúcidas
Costaneras (polines) a menos de 700 mm, la de arriba a 15 – 18 cm de la cumbrera, pendiente entre 20% y 45%. Agujeros de 6 mm, tornillos de 70 mm con capuchón ASA en la cresta de la onda sobre la costanera, 4 – 5 juegos por m², nunca en el valle, y cada lámina traslapada una onda sobre la siguiente. Las láminas traslúcidas dejan pasar el 80 – 90% de la luz y se reparten en el 5 – 10% del techo. Santiago vende láminas y accesorios y envía videos de instalación; no instala. El precio se cotiza por pedido y por escrito.
Preguntas frecuentes
¿La lámina de pvc se oxida en una galera avícola?
No, no tiene metal. Santiago no publica clasificación de resistencia química; si usa productos fuertes en el techo, pruebe una muestra.
¿Qué perfil se usa para el techo de una galera?
El de 5 ondas (1.08 m de ancho, 1.00 m útil, onda de 32 mm) es común en techos; el de 11 ondas (onda de 20 mm) se usa mucho en paredes.
¿Cuántas láminas lleva una galera de 12 × 60 m?
Con techo a dos aguas al 25% y alero de 0.6 m: 122 láminas de 6.80 m, unos 830 m, de ellas 6 – 12 traslúcidas.
¿A qué distancia van las costaneras?
A menos de 700 mm, la de arriba a 15 – 18 cm de la cumbrera.
Read next on this topic
Main guide: Anti Corrosion Roofing Sheet for Factories and Farms
Sources for the figures in this article
- Profiles, 2.5–3.0 mm thickness and 10-year warranty: Santiago ASA/PVC product specification.
- About 6–8 °C cooler than bare metal sheet and about 80% less rain noise: Santiago's own comparisons on finished roofs in Vietnam.
- HS code 3925.90.00: Harmonized System Chapter 39 (builders' ware of plastics), as applied in Vietnam's export tariff.
- Certificates of origin (Form D, AI, AK/VK, AJ/VJ, VC, CPTPP): issued by Vietnam's Ministry of Industry and Trade under the country's free trade agreements.
- Minimum order of one 40 ft container (about 5,000 m) and about 5 days for production and loading: Santiago export desk, October 2026.
Updated 03/11/2026. Santiago Import Export Co., Ltd, Vietnam. WhatsApp +84 935 391 495 (Mr. Quyen), hotline +84 965 437 316 (Mrs. Ly), email salessantiagoroofing@gmail.com.

