Mr Quyen - Santiago. Posted 14/11/2026

Santiago roofing sheets reach the Maldives in a 40 ft container from Vietnam to Malé, about 5,000 m of sheet with colours, profiles and accessories mixed, then go on by boat to each island. Because many islands have no hardware store, order every ridge piece, flashing, screw and ASA cap with the sheets: a 9 × 7 m house with a small lean-to needs 25 sheets, about 101 m, plus 390 – 485 screw sets and a spare margin.

Stacked blue corrugated sheets, Vietnam

Stacked blue corrugated sheets, Vietnam

 

How do roofing sheets get from the factory to an island?

 

The route has three legs. Santiago produces the order in Vietnam, which takes about 5 days after the order is confirmed. The container then ships to Malé; the transit time depends on the route and is confirmed by the shipping line. From Malé the sheets go on by boat or barge to the island where the building stands.

The export minimum is one 40 ft container of about 5,000 m of sheet. That is more than most single buildings need, so roofing for a guesthouse or a family house is normally bought through a Malé importer who fills a container for several customers. A resort renovating many villas at once may fill a container on its own. We know of no free-trade agreement between the Maldives and Vietnam that we can confirm, so do not count on a duty saving: Santiago issues a certificate of origin (Vietnam) and ships under HS 3925.90.00, and the importer's customs broker confirms the classification, the duty and the documents.

 

Why order every accessory and screw before the container leaves?

 

On the mainland, a builder who runs short of screws drives to a shop. On many Maldivian islands there is no shop that stocks a matching ridge cap or ASA caps in the right colour, and the next delivery may be weeks away. A roof that stops for a missing ridge terminal sits open to the rain. So the order should list every piece the roof needs, plus a margin of screws and caps for drops and mistakes, for example 10%.

 

What does a full order for one island house look like? A worked example

 

Take a single-storey house of 9 × 7 m with a gable roof, ridge along the 9 m side, slope 35% (about 19°), eaves 0.6 m and gable overhangs 0.25 m. On one gable wall there is a kitchen lean-to 4 m wide and 2.5 m deep at 25%, whose sheets run up into the house wall.

ItemWorkingOrder
Main roof sheetsFace (3.5 m + 0.6 m) × 1.059 = 4.34 m, rounded up to 20 steps; (9 m + 0.5 m) ÷ 0.96 = 9.9, so 10 per face20 sheets of 4.380 m, 87.6 m
Lean-to sheets2.5 m × 1.031 = 2.58 m, rounded up to 12 steps; 4 m ÷ 0.96 = 4.2, so 5 sheets5 sheets of 2.628 m, 13.1 m
Roof area9.6 × 4.38 × 2 + 4.8 × 2.628about 97 m²
Screw sets with ASA caps97 m² × 4 – 5 per m², plus about 10% spareabout 430 – 535
Ridge capMain ridge9.6 m
Ridge terminalsBoth ends of the ridge2
Eave drip tileTwo main eaves plus the lean-to eave2 × 9.6 m + 4.8 m = 24 m
Vertical wall flashingWhere the lean-to sheets run into the house wall4.8 m
Side wall flashing, left and rightOnly where sheets run along a wallNot needed here: both lean-to sides are open
Sheet weight97 m² × 5.4 kgabout 520 kg; the longest sheet about 23 kg

Santiago turns these running metres into pieces in the written quotation. Send a simple roof drawing with the lengths of every ridge, eave and wall line, and say for each wall line whether the sheets run along the wall (side wall flashing, left or right) or into it (vertical wall flashing). Those two are the pieces people most often forget, and the eave drip tile is the one that goes along the lower edge where the water runs off.

Man with ridge pieces at the factory, Vietnam

Man with ridge pieces at the factory, Vietnam

 

Which accessories go where on the roof?

 

AccessoryWhere it goes
Ridge capAlong the top ridge
Hip (diagonal) ridgeAlong the sloping ridges of a hip roof
Ridge terminalAt the open end of a ridge
Three-way and four-way piecesWhere three or four ridges meet
Eave drip tileAlong the lower edge (eaves), where the water runs off
Side wall flashing, left and rightWhere the sheets run along a wall, parallel to the water flow
Vertical wall flashingWhere the sheets run into a wall at the top of a slope
ASA screw capsOn every screw head

All accessories come in the same colours as the sheets: dark grey, red, blue, orange and chocolate as standard, with green, white and purple made to order.

 

Sheet lengths that fit the boat

 

The tile sheet is 1.05 m wide, covers 0.96 m and is cut at the factory in 219 mm steps, so every sheet already has the length of the roof face it covers. Before ordering, check the longest sheet against the deck of the boat or barge that will take it from Malé, and against the path from the jetty to the site. If a roof face is longer than the boat can carry, talk to the builder and to Santiago about the roof layout before the order is fixed, not after the container arrives.

Weight helps here. The tile sheet weighs about 5.4 kg per m² of roof at 2.5 mm, and corrugated 2.5 mm sheet about 5.2 kg per running metre, so most sheets are a two-person carry without a crane. Ask for the packing list to show what is in each bundle, and if one container serves several islands, ask the importer to mark bundles by customer before they leave Malé.

Cream tile sheets, Vietnam

Cream tile sheets, Vietnam

 

How could a Malé importer fill one container?

 

LineRunning metresTypical use
Tile sheet, chocolate, 2.5 mm1,500 mResort villa roofs
Tile sheet, red, 2.5 mm1,000 mGuesthouses on local islands
Tile sheet, dark grey, 2.5 mm1,000 mIsland family houses
Corrugated 5 waves, blue900 mStores and workshops
Corrugated 11 waves, white (made to order)600 mStaff housing
Total5,000 mabout 4,860 m² of roof
Screw sets with ASA caps4,860 m² × 4 – 5 per m², plus sparesabout 19,400 – 24,300 before spares
AccessoriesPer customer drawingListed line by line in the quotation

Every lot comes with a quality certificate (CQ); the factory holds ISO 9001:2015 certificate ICI-23087.D and has Quatest test results. Ask for free samples before the first order (the buyer pays the courier), check the thickness (2.5 or 3.0 mm, with 2.5 mm the minimum for a roof) and look at the colours in daylight. The price is quoted per order in writing. Santiago publishes no wind or fire rating and holds no Maldivian certification, so the project designer or builder decides on the frame and fixings.

White corrugated sheets, Vietnam

White corrugated sheets, Vietnam

How is an export container of roofing sheets loaded?

This one-minute short is the loading process for an export order: orange sheets go down a ramp into the container and the crew stacks them inside, with Mr Quyen explaining in English.

Loading PVC roof tiles into an export container (Santiago video on YouTube).

More short videos from Santiago

Both clips below come from Santiago's own YouTube channel and were filmed at the factory in Vietnam or on Santiago roofs.

What does a sheet look like on the factory floor?

Filmed inside the Santiago factory: a worker steps onto a white tile sheet, red and blue sheets get a torch test, and the last scene is the team beside an export container.

Santiago tile sheets at the factory (Santiago video on YouTube).

How tough is a 2.5 mm sheet? The truck test

A Santiago delivery truck drives over a blue ASA/PVC tile sheet and a blue corrugated sheet laid on the factory yard in Vietnam. It is a demonstration only; on a roof the sheet still needs purlins less than 700 mm apart.

Truck test on Santiago ASA/PVC sheets (Santiago video on YouTube).

Santiago – a leading exporter of ASA/PVC roofing from Vietnam

Santiago roofing is produced and loaded into containers at our factory in Vietnam. It has been exported to India since 2023, Thailand since 2024 and the USA since 2025. Every export shipment comes with a commercial invoice, packing list, bill of lading and a certificate of origin (C/O) issued by Vietnam's Ministry of Industry and Trade, which importers use to claim the duty preference of their trade agreement.

ItemDetails
HS code3925.90.00 (ASA/PVC roofing sheets)
Certificate of originForm D (ASEAN), Form AI (India), Form AK / VK (Korea), Form AJ / VJ (Japan), Form VC (Chile), CPTPP proof of origin
Shipped fromVietnam, by container

Certificate of origin Form AI (ASEAN–India) for Santiago ASA/PVC roofing sheets, HS 39259000, certified on 24 September 2026. Buyer details are hidden.

Certificate of origin Form AI (ASEAN–India) for Santiago ASA/PVC roofing sheets, HS 39259000, certified on 24 September 2026. Buyer details are hidden.

The Santiago team beside a loaded export container at the factory, November 2024

The Santiago team beside a loaded export container at the factory, November 2024

Loading Santiago roof tiles into an export container

Loading Santiago roof tiles into an export container

 

Frequently asked questions

 

How do I get Santiago roofing sheets to an island in the Maldives?

Through a Malé importer who brings in a 40 ft container from Vietnam (about 5,000 m of sheet), then by boat or barge to the island. Production takes about 5 days; transit time depends on the route.

 

Can I buy roofing for one house directly from the factory?

The export minimum is one 40 ft container of about 5,000 m, so one house is normally supplied through a Malé importer. A resort with many buildings may fill a container itself.

 

What should I order besides the sheets?

Ridge cap, ridge terminals, any hip ridge or three-way and four-way pieces, eave drip tile, side wall flashing (left and right) and vertical wall flashing where needed, and ASA screw caps with every screw, plus about 10% spare screws and caps.

 

Is there a duty saving for roofing from Vietnam?

We know of no free-trade agreement between the Maldives and Vietnam that we can confirm. Santiago issues a certificate of origin (Vietnam) and ships under HS 3925.90.00; the importer's customs broker confirms the duty.

 

Will long sheets fit on the boat to my island?

Sheets are cut to order in 219 mm steps, so you know every length before shipping. Check the longest one against the boat's deck and discuss the roof layout with the builder and Santiago before ordering.

 

Read more

 

 

Sources for the figures in this article

  • Profiles, 2.5–3.0 mm thickness and 10-year warranty: Santiago ASA/PVC product specification.
  • HS code 3925.90.00: Harmonized System Chapter 39 (builders' ware of plastics), as applied in Vietnam's export tariff.
  • Certificates of origin (Form D, AI, AK/VK, AJ/VJ, VC, CPTPP): issued by Vietnam's Ministry of Industry and Trade under the country's free trade agreements.
  • Minimum order of one 40 ft container (about 5,000 m) and about 5 days for production and loading: Santiago export desk, October 2026.

Updated 03/11/2026. Santiago Import Export Co., Ltd, Vietnam. WhatsApp +84 935 391 495 (Mr. Quyen), hotline +84 965 437 316 (Mrs. Ly), email salessantiagoroofing@gmail.com.