Mr Quyen - Santiago. Posted 14/11/2026
Plastic roofing that looks like tiles is usually a rigid PVC roof tile panel: one long sheet moulded as rows of tiles. Santiago's is 1.05 m wide with a 0.96 m cover width and a 219 mm tile step, weighs about 5.4 kg per m² at 2.5 mm, and is finished with ridge and hip pieces in the same colour. Santiago does not make a flat slate-look profile.

An orange tile-sheet roof with a camera tripod standing on it, Vietnam
Can plastic roofing really look like tiles?
From the street, yes. A tile sheet carries the same rows of curved tiles you see on a Spanish-style clay roof, and once the ridge cap, hip ridges and eave pieces are on, the roof reads as tiles from the ground. Santiago's tile step is 219 mm (about 8.6 in), close to the rhythm of a row of real tiles.
Up close, you can tell. The panel is continuous across its width, so there are no gaps between single tiles, and the screws show as neat rows of caps on the crests. Some owners like that clean look; others want the slightly uneven texture of old clay. It is worth deciding which you want before you order.
What gives the tile look away, and how do you avoid it?
| Detail that looks wrong | Why it happens | How installers avoid it |
|---|---|---|
| Bare sheet edge at the ridge | No ridge cap fitted | Fit ridge cap in the same colour along the top |
| Open ends at the eave | Profile left open at the bottom edge | Fit eave drip tiles |
| Raw joint at a hip | Two roof faces meet with no cover | Fit diagonal (hip) ridge pieces, with three-way or four-way pieces where they meet |
| Wandering screw lines | Screws placed where the purlin was not | Keep purlins at 440 or 660 mm, one under each tile step foot, and screw through the top of the wave |
| Gap against a wall | Sheet stops short of a parapet or wall | Fit vertical wall flashing |
All of these pieces come in the sheet colours: dark grey, red, blue, orange and chocolate as standard, with green, white and purple made to order.

Aerial view of a grey pyramid tile roof, Vietnam
Is there plastic roofing that looks like slate?
Santiago does not make one. Slate is flat and laid in thin overlapping rectangles, while Santiago's tile sheet has a curved Spanish-style profile. A dark grey tile sheet gives a roof the dark tone many slate roofs have, and on a steep modern house that can be enough, but it will still read as curved tile, not slate. If the flat slate pattern itself is what you need, look for a product made in that shape and ask its maker for samples and test data.
How big are PVC roof tile panels, and how many do I need?
Because each panel covers many tiles at once, the count is small. Here is a worked example for a simple gable roof of about 100 m², two faces each 10.4 m long with a slope length of 4.82 m (22 tile steps of 219 mm).
| Item | Calculation | Result |
|---|---|---|
| Sheets per face | 10.4 m ÷ 0.96 m cover width | 11 sheets (round up) |
| Sheets for the roof | 11 × 2 faces | 22 sheets, each 4.82 m long |
| Roof area covered | 22 × 4.82 m × 0.96 m | About 102 m² |
| Weight at 2.5 mm | 102 m² × 5.4 kg | About 550 kg (about 1,210 lb) |
| Screw sets | 4 – 5 per m² | About 410 – 510 sets |
| Ridge cap | Length of the ridge | 10.4 m plus terminals at each end |
Use your own measurements. The slope length is the distance along the slope from the ridge to the eave, not the height of the roof, and the top purlin sits 15 – 18 cm (6 – 7 in) below the ridge. Sheets are cut to order in 219 mm steps, so round each length to a whole number of steps.

A house with a brown tile-sheet roof and a terrace, Vietnam
Where does a tile-look plastic roof make sense?
- Houses and villas where the owner wants a tile roof on a light steel frame.
- Gazebos, pyramid roofs and pavilions with many short hips.
- Terraces, porches and extensions next to a house that already has a tile roof.
- Resorts and cafés that want the look without heavy roof tiles.
Whatever the building, the frame needs purlins less than 700 mm (27.5 in) apart and a slope of 20 – 45 %. Follow your local building code and have the structure checked by your builder or engineer; Santiago gives no structural, wind or fire rating.

A gazebo with a dark red tile-sheet roof, Vietnam
How does a tile-look sheet roof look on real buildings?
Red ASA/PVC tile sheets are carried up to a house, a flame is put to a stack of sheets, and the short ends on a blue warehouse roof under installation and grey sheets on the factory roller line. A flame test is a demonstration, not a fire rating.
Santiago PVC roofing tiles in real conditions (Santiago video on YouTube).
More short videos of tile-look roofs
Two more English shorts from the Santiago YouTube channel. Each one is about a minute or less.
How does a grey tile-look roof look once fixed?
In under a minute the short goes from the Santiago factory floor to a grey tile-profile roof on site: some sheets already fixed, installers screwing down the rest, and a finished run next to the gutter.
Santiago uPVC tile roofs on site (Santiago video on YouTube).
How does a tile sheet compare with metal and clay?
A one-minute short with English captions: Mr Quyen compares metal and clay roofs with Santiago ASA/uPVC tile sheets, first in the factory and then on finished red and grey roofs.
Heat and rain noise: Santiago ASA/uPVC roofing explained (Santiago video on YouTube).
Santiago – a leading exporter of ASA/PVC roofing from Vietnam
Santiago roofing is produced and loaded into containers at our factory in Vietnam. It has been exported to India since 2023, Thailand since 2024 and the USA since 2025. Every export shipment comes with a commercial invoice, packing list, bill of lading and a certificate of origin (C/O) issued by Vietnam's Ministry of Industry and Trade, which importers use to claim the duty preference of their trade agreement.
| Item | Details |
|---|---|
| HS code | 3925.90.00 (ASA/PVC roofing sheets) |
| Certificate of origin | Form D (ASEAN), Form AI (India), Form AK / VK (Korea), Form AJ / VJ (Japan), Form VC (Chile), CPTPP proof of origin |
| Shipped from | Vietnam, by container |

Certificate of origin Form AI (ASEAN–India) for Santiago ASA/PVC roofing sheets, HS 39259000, certified on 24 September 2026. Buyer details are hidden.

The Santiago team beside a loaded export container at the factory, November 2024

Loading Santiago roof tiles into an export container
Frequently asked questions
Is there plastic roofing that looks like tiles?
Yes. A PVC roof tile panel is a rigid sheet moulded as rows of tiles. Santiago's is 1.05 m wide, covers 0.96 m and has a 219 mm tile step, with matching ridge and hip pieces.
Is there plastic roofing that looks like slate?
Santiago does not make a slate-look profile. Its dark grey tile sheet gives a dark roof, but the shape is a curved tile, not flat slate.
How many PVC roof tile panels do I need for 100 m²?
For a simple gable roof with 10.4 m long faces, about 22 sheets cut to the slope length, plus 410 – 510 screw sets and the ridge pieces. Work from your own measurements.
How heavy is plastic tile roofing?
A 2.5 mm Santiago tile sheet weighs about 5.4 kg per m² of roof (about 1.1 lb per sq ft). Your engineer still checks the frame.
Can I get a sample to check the tile look?
Yes. Santiago sends free samples; the buyer pays the courier. Look at them in daylight next to the walls of the house.
Read more
- Synthetic Spanish tile roofing
- Roof tile accessories checklist
- Pyramid roofs and gazebos: which tile accessories you need
- PVC roofing sheet colours
- ASA/PVC roof tile sheet
Read next on this topic
Main guide: PVC Roof Sheet Design for Houses: Tile or Corrugated
Sources for the figures in this article
- Profiles, 2.5–3.0 mm thickness and 10-year warranty: Santiago ASA/PVC product specification.
- HS code 3925.90.00: Harmonized System Chapter 39 (builders' ware of plastics), as applied in Vietnam's export tariff.
- Certificates of origin (Form D, AI, AK/VK, AJ/VJ, VC, CPTPP): issued by Vietnam's Ministry of Industry and Trade under the country's free trade agreements.
- Minimum order of one 40 ft container (about 5,000 m) and about 5 days for production and loading: Santiago export desk, October 2026.
Updated 03/11/2026. Santiago Import Export Co., Ltd, Vietnam. WhatsApp +84 935 391 495 (Mr. Quyen), hotline +84 965 437 316 (Mrs. Ly), email salessantiagoroofing@gmail.com.

