Mr Quyen - Santiago. Posted 14/11/2026

A uPVC porch roof or roof canopy at the front of a house can be covered with ASA/PVC tile sheet, which looks like a row of roof tiles and weighs about 5.4 kg per m² at 2.5 mm. Give it a slope of at least 20%, purlins less than 700 mm apart, vertical wall flashing at the house wall and fixings designed for wind lifting the canopy from below. The frame and its brackets are checked by your builder under local building codes.

Balcony awning with an orange tile roof, Vietnam

Balcony awning with an orange tile roof, Vietnam

 

What does "uPVC porch roof" actually mean?

 

The phrase covers two different things. In the UK and parts of Europe a uPVC porch is usually a small enclosed entrance with uPVC-framed windows and a door, and its roof sits on that frame. Elsewhere, people use it for any plastic roof over the front door: an open canopy on brackets or posts, a window awning, or a cover over a balcony.

In both cases Santiago's sheet is the roof covering, not the frame. A tile-look roof on an enclosed porch is only fitted where the porch frame has been designed or checked for it. Santiago supplies sheets and accessories and sends installation videos; it does not install, and it gives no structural, wind or fire rating.

 

Which roofing sheets suit a canopy at the house front?

 

WhereSheet that usually fitsWhy
Front door canopyTile sheetMatches a tiled main roof or gives a plain house a tiled front
Window awnings along a wallTile sheet, short lengthsSmall pieces, cut to length in 219 mm steps, look like little tiled hoods
Balcony coverTile sheetSeen from the street and from inside; colour matters
Side passage or back door5 or 6-wave corrugated sheetPractical where the look matters less
Canopy that must stay brightSkylight sheet in part of the roofOpaque sheets darken the space below; skylight sheets pass 80 – 90% of light

Standard colours are dark grey, red, blue, orange and chocolate, so a front canopy can match the main roof. Green, white and purple are made to order and take extra days. Ridge terminals, eave sealing tile and wall flashing come in the same colours.

Grey tile awnings above windows on a house wall, Vietnam

Grey tile awnings above windows on a house wall, Vietnam

 

What does the builder need to check?

 

  • The wall or posts the canopy hangs from, and the brackets or fixings into them
  • Slope: at least 20%, about 11.3° or 2.4 in 12; flatter canopies hold water
  • Purlins less than 700 mm apart, at 440 or 660 mm for the tile sheet so one sits under each tile step
  • Wind: a canopy open underneath can be lifted by gusts, so the number and type of fixings follow local rules and the installer's design
  • Where the rain goes: off the front edge, into a gutter, or away from the door step

Sheets are fixed the same way as on a main roof: pre-drilled 6 mm holes, 70 mm screws through the top of the wave over a purlin, ASA caps, 4 – 5 screw sets per m², and more at the edges, which on a small canopy is most of it.

 

Worked example: roofing sheets for a 2.4 m door canopy

 

A canopy over a door, 2.4 m wide along the wall with 0.1 m extra at each side, projecting 1.5 m from the wall at a 30% slope (16.7°). The list covers the roof covering only; the frame is the builder's design.

ItemWorkingResult
Length along the slope1.5 m × 1.044 for a 30% slopeabout 1.57 m
Sheet length1.57 m ÷ 0.219 m = 7.2, round up to 8 steps1.752 m
Width to cover2.4 m + 2 × 0.1 m2.6 m
Sheets2.6 m ÷ 0.96 m = 2.7, round up; last sheet trimmed3 sheets, about 5.3 running metres
Roof area2.6 m × 1.75 mabout 4.6 m²
Purlin rows1.75 m at 660 or 440 mmabout 4 rows at 660 mm or 5 at 440 mm
Screw sets with ASA caps4.6 m² × 4 – 5 per m², plus edgesabout 20 – 25
Vertical wall flashingAlong the house wall2.6 m
Eave drip tileAlong the front edge2.6 m
Ridge terminalsOptional, to close the side edgesas the design needs
Sheet weight4.6 m² × 5.4 kgabout 25 kg

Installers fitting grey tile sheets to a roof frame, Vietnam

Installers fitting grey tile sheets to a roof frame, Vietnam

 

How do you keep rain off the door step?

 

A canopy sheds all its water along one edge, often right where people stand. Decide early whether that edge gets a gutter with a downpipe or whether the canopy is wide and deep enough that the drip line falls clear of the step. At the top, vertical wall flashing stops water running down the wall and behind the sheets; it is the piece most often left out on small canopies, and the one most often blamed when a hallway gets damp.

 

Will a plastic canopy be hot or noisy?

 

Santiago's figures compare ASA/PVC with bare metal sheet: about 6 – 8 °C cooler under the roof and about 80% less rain noise. That matters most for a balcony cover or a canopy over a seating area. The ASA top layer showed no colour change after 2,000 hours of artificial UV, the colour is rated for 30 years, and the sheet has no metal to rust beside a busy front door.

 

How do you buy sheets for one porch or canopy?

 

Santiago exports by the 40 ft container, about 5,000 m of sheet with colours and accessories mixed. A single porch or canopy is bought through a dealer, importer or builder in your country who brings in containers. Ask them for a free sample (the buyer pays the courier) and hold it against your front wall in daylight before choosing the colour.

Installers working on a small roof with brown tile sheets, Vietnam

Installers working on a small roof with brown tile sheets, Vietnam

Why swap a metal porch roof for a tile sheet?

Mr Quyen holds a white tile sheet in the Santiago factory in Vietnam and explains in English, with captions, why bare metal roofs are hot, noisy in rain and costly to repair. The short then moves to a red tile roof on a house and a finished grey tile roof beside the gutter.

Heat and rain noise: Santiago ASA/uPVC roofing explained (Santiago video on YouTube).

More short videos for porches and canopies

Two more English shorts from the Santiago YouTube channel. Each one is about a minute or less.

How do new tile sheets look on a house?

This one-minute short moves from red tile sheets going up onto a house to a flame test on a stack of sheets, then a blue warehouse roof under installation. A flame test is a demonstration, not a fire rating.

Santiago PVC roofing tiles in real conditions (Santiago video on YouTube).

Which ridge and edge pieces finish a small roof?

The camera passes red ridge pieces and stacked red tile sheets in the Santiago warehouse, the stock that goes out on export and OEM orders. The short runs 19 seconds.

Red ridge caps and tile sheets in the Santiago warehouse (Santiago video on YouTube).

Santiago – a leading exporter of ASA/PVC roofing from Vietnam

Santiago roofing is produced and loaded into containers at our factory in Vietnam. It has been exported to India since 2023, Thailand since 2024 and the USA since 2025. Every export shipment comes with a commercial invoice, packing list, bill of lading and a certificate of origin (C/O) issued by Vietnam's Ministry of Industry and Trade, which importers use to claim the duty preference of their trade agreement.

ItemDetails
HS code3925.90.00 (ASA/PVC roofing sheets)
Certificate of originForm D (ASEAN), Form AI (India), Form AK / VK (Korea), Form AJ / VJ (Japan), Form VC (Chile), CPTPP proof of origin
Shipped fromVietnam, by container

Certificate of origin Form AI (ASEAN–India) for Santiago ASA/PVC roofing sheets, HS 39259000, certified on 24 September 2026. Buyer details are hidden.

Certificate of origin Form AI (ASEAN–India) for Santiago ASA/PVC roofing sheets, HS 39259000, certified on 24 September 2026. Buyer details are hidden.

The Santiago team beside a loaded export container at the factory, November 2024

The Santiago team beside a loaded export container at the factory, November 2024

Loading Santiago roof tiles into an export container

Loading Santiago roof tiles into an export container

 

Frequently asked questions

 

Can I use plastic tile sheets for a uPVC porch roof?

Yes, if the porch frame has been designed or checked for a solid roof, with purlins less than 700 mm apart and a slope of 20% or more. Your builder checks it under local building codes; Santiago gives no structural rating.

 

What is the best roofing sheet for a canopy over the front door?

For a tiled look, an ASA/PVC tile sheet in the colour of the main roof. For a side or back entrance where looks matter less, a 5 or 6-wave corrugated sheet. Add skylight sheets if the space must stay bright.

 

What slope does a roof canopy need?

At least 20%, about 11.3° or 2.4 in 12. Santiago recommends 20 – 45% for its sheets.

 

How many sheets for a 2.4 m wide door canopy?

With 0.1 m overhang each side the width is 2.6 m, which needs 3 tile sheets at 0.96 m cover, the last trimmed. For a 1.5 m projection at 30% slope each sheet is cut to 8 steps, 1.752 m.

 

How is a canopy fixed against wind?

The installer designs the brackets, frame and fixings to local rules, because wind can lift a canopy from below. Sheets are screwed through the top of the wave over a purlin with ASA caps, 4 – 5 sets per m², more at the edges.

 

Read more

 

 

Sources for the figures in this article

  • Profiles, 2.5–3.0 mm thickness and 10-year warranty: Santiago ASA/PVC product specification.
  • About 6–8 °C cooler than bare metal sheet and about 80% less rain noise: Santiago's own comparisons on finished roofs in Vietnam.
  • HS code 3925.90.00: Harmonized System Chapter 39 (builders' ware of plastics), as applied in Vietnam's export tariff.
  • Certificates of origin (Form D, AI, AK/VK, AJ/VJ, VC, CPTPP): issued by Vietnam's Ministry of Industry and Trade under the country's free trade agreements.
  • Minimum order of one 40 ft container (about 5,000 m) and about 5 days for production and loading: Santiago export desk, October 2026.

Updated 03/11/2026. Santiago Import Export Co., Ltd, Vietnam. WhatsApp +84 935 391 495 (Mr. Quyen), hotline +84 965 437 316 (Mrs. Ly), email salessantiagoroofing@gmail.com.