Mr Quyền - Santiago. Posted 22/11/2026

A mushroom house needs a roof that keeps the room cool, dim and humid without dripping on the beds. Bare metal sheet heats the room and drips at night; thatch shades well but rots and harbours pests. ASA/PVC sheet runs 6 – 8 °C cooler underneath than bare metal in Santiago's tests, does not rust in the damp, and can be made with a dark underside to cut light.

Pale green ASA/PVC sheet roof with screw caps, Vietnam

Pale green ASA/PVC sheet roof with screw caps, Vietnam

 

What does a mushroom house need from its roof?

 

Oyster, straw and other cultivated mushrooms are grown in rooms kept humid and shaded, with fresh air moving through. The roof decides much of that climate. In a hot country, a roof that soaks up the afternoon sun pushes the room temperature up just when growers are fighting to keep it down, and a roof that drips spoils bags and beds below.

  • Heat: less heat through the roof means less misting and fan time
  • Drips: water falling from the roof underside spreads disease on the beds
  • Light: most growing stages need dim, even light
  • Humidity: the roof and its fixings sit in damp air every day
  • Air: openings at the eaves and ridge let stale air out

 

How do common mushroom house roofs compare?

 

RoofHeat insideDrips and humidityLife in damp air
Bare metal sheetHottest in the afternoonCools fast at night and dripsRusts at screws and cut edges
Thatch or grassCool and shadedLittle drippingRots, harbours insects and rodents, needs renewing
Shade net over a frameCoolNo drip, but no rain coverNet wears out in sun
ASA/PVC sheet6 – 8 °C cooler underneath than bare metal (Santiago tests)Less sudden cooling than metal; still ventilateNo rust; colour held by the ASA top layer

Inside a shed under a corrugated sheet roof with light strips, Vietnam

Inside a shed under a corrugated sheet roof with light strips, Vietnam

 

How do I stop the roof dripping on the beds?

 

Condensation forms when the humid air of the grow room meets a roof surface colder than its dew point. A plastic sheet cools more slowly than bare metal, but in a room kept very humid it can still happen. Keep the roof space ventilated, so warm damp air leaves at the ridge or gable before it settles on the sheet, give the roof a slope of at least 20%, so any water runs to the eaves instead of dropping, and consider a ceiling or insulation layer under the sheet in the most humid rooms. Our anti-condensation guide covers the details.

 

Can the roof keep the room dark?

 

Santiago's sheets have a milky-white underside as standard, which reflects light inside. A dark underside can be made to order for rooms that must stay dim. If some daylight is wanted, for example in a packing or sorting area, skylight sheets can go on 5 – 10% of that part of the roof.

 

How should a mushroom house roof be built?

 

  1. Use a frame that does not rot in damp air, such as galvanised steel or FRP purlins.
  2. Space the purlins less than 700 mm apart.
  3. Keep a slope of 20 – 45%.
  4. Fix through the top of the wave with 70 mm screws and ASA caps, 4 – 5 sets per m², in pre-drilled 6 mm holes.
  5. Leave openings at the eaves and ridge, screened against insects.

Can a foam layer go under an ASA/uPVC roofing sheet?

A 48-second short from the Santiago channel that answers a question buyers often ask: whether a foam layer can be added under an ASA/uPVC roofing sheet.

Foam under an ASA/uPVC roofing sheet (Santiago video on YouTube).

More short videos on heat and drips

Both clips below come from Santiago's own YouTube channel and were filmed at the factory in Vietnam or on Santiago roofs.

Why do bare metal roofs drip and roar?

Mr Quyen holds a white tile sheet in the Santiago factory and explains in English, with captions, why bare metal roofs are hot, noisy in rain and costly to repair. The short then shows a red tile roof on a house and a finished grey tile roof beside the gutter.

Heat and rain noise: Santiago ASA/uPVC roofing explained (Santiago video on YouTube).

How does the sheet react to heat?

The heat-test short: grey and red sheets under a flame, Mr Quyen on grey sheets at the factory, then a warehouse roof re-laid in blue. It shows how the sheet behaves under heat, not a certified fire rating.

Heat test and a warehouse re-roof with uPVC sheets (Santiago video on YouTube).

Santiago – a leading exporter of ASA/PVC roofing from Vietnam

Santiago roofing is produced and loaded into containers at our factory in Vietnam. It has been exported to India since 2023, Thailand since 2024 and the USA since 2025. Every export shipment comes with a commercial invoice, packing list, bill of lading and a certificate of origin (C/O) issued by Vietnam's Ministry of Industry and Trade, which importers use to claim the duty preference of their trade agreement.

ItemDetails
HS code3925.90.00 (ASA/PVC roofing sheets)
Certificate of originForm D (ASEAN), Form AI (India), Form AK / VK (Korea), Form AJ / VJ (Japan), Form VC (Chile), CPTPP proof of origin
Shipped fromVietnam, by container

Certificate of origin Form AI (ASEAN–India) for Santiago ASA/PVC roofing sheets, HS 39259000, certified on 24 September 2026. Buyer details are hidden.

Certificate of origin Form AI (ASEAN–India) for Santiago ASA/PVC roofing sheets, HS 39259000, certified on 24 September 2026. Buyer details are hidden.

The Santiago team beside a loaded export container at the factory, November 2024

The Santiago team beside a loaded export container at the factory, November 2024

Loading Santiago roof tiles into an export container

Loading Santiago roof tiles into an export container

 

Frequently asked questions

 

What is the best roof for a mushroom house?

One that keeps the room cool, dim and free of drips. ASA/PVC sheet runs 6 – 8 °C cooler underneath than bare metal in Santiago's tests and does not rust in damp air; combine it with ventilation.

 

Why does my mushroom house roof drip?

Humid room air condenses on a roof surface colder than its dew point. Ventilate the roof space, keep a slope of at least 20% and add a ceiling or insulation in very humid rooms.

 

Can a PVC roof make a mushroom house dark?

The standard underside is milky white. A dark underside can be made to order for rooms that must stay dim.

 

Will a PVC roof rust in a humid mushroom house?

No. ASA/PVC sheet contains no metal. Cover screw heads with ASA caps so the screws stay protected too.

 

Read more

 


 

ฉบับภาษาไทย

 

หลังคาโรงเรือนเพาะเห็ดต้องช่วยให้ห้องเย็น มืด ชื้นพอดี และไม่มีน้ำหยดลงก้อนเห็ด เมทัลชีทเปล่าร้อนในตอนบ่ายและหยดน้ำตอนกลางคืน หลังคาจากหญ้าคาให้ร่มดีแต่ผุและมีแมลง แผ่น ASA/PVC เย็นกว่าเมทัลชีทเปล่า 6 – 8 °C ตามการทดสอบของ Santiago ไม่เป็นสนิมในที่ชื้น และสั่งผลิตด้านล่างสีเข้มเพื่อลดแสงได้

 

หลังคาแบบไหนเหมาะกับโรงเรือนเพาะเห็ด

 

หลังคาความร้อนในโรงเรือนหยดน้ำอายุในที่ชื้น
เมทัลชีทเปล่าร้อนที่สุดตอนบ่ายเย็นเร็วตอนกลางคืนและหยดเป็นสนิมที่สกรูและรอยตัด
หญ้าคาเย็นหยดน้อยผุ มีแมลงและหนู
แผ่น ASA/PVCเย็นกว่าเมทัลชีท 6 – 8 °Cต้องมีช่องระบายอากาศไม่เป็นสนิม

 

ป้องกันน้ำหยดลงก้อนเห็ดอย่างไร

 

น้ำหยดเกิดเมื่ออากาศชื้นในโรงเรือนไปสัมผัสหลังคาที่เย็นกว่าจุดน้ำค้าง ให้มีช่องระบายอากาศที่ชายคาและสันหลังคา ทำความชันหลังคาอย่างน้อย 20% ให้น้ำไหลลงชายคา และห้องที่ชื้นมากควรมีฝ้าหรือฉนวนใต้แผ่น แป (purlin) ควรห่างกันไม่เกิน 700 mm และยึดสกรูบนสันลอนพร้อมฝาครอบ ASA

โครงหลังคาเหล็กระหว่างก่อสร้างใต้แผ่นหลังคา เวียดนาม

โครงหลังคาเหล็กระหว่างก่อสร้างใต้แผ่นหลังคา เวียดนาม

 

นำเข้าจากเวียดนาม

 

Santiago ส่งออกหลังคา ASA/PVC ไปไทยตั้งแต่ปี 2024 พร้อมใบรับรองถิ่นกำเนิด Form D ตู้ 40 ฟุตบรรจุแผ่นได้ประมาณ 5,000 เมตร ผสมลอน สี และแผ่นโปร่งแสงในตู้เดียวได้

บ้านในฟาร์มหลังเล็กผนังและหลังคาแผ่นสีเขียวอ่อน เวียดนาม

บ้านในฟาร์มหลังเล็กผนังและหลังคาแผ่นสีเขียวอ่อน เวียดนาม

 

คำถามที่พบบ่อย

 

หลังคาโรงเรือนเพาะเห็ดแบบไหนดี

แบบที่ทำให้ห้องเย็น มืด และไม่มีน้ำหยด แผ่น ASA/PVC เย็นกว่าเมทัลชีทเปล่า 6 – 8 °C และไม่เป็นสนิม ใช้คู่กับการระบายอากาศ

 

ทำไมหลังคาโรงเห็ดมีน้ำหยด

อากาศชื้นกลั่นตัวบนหลังคาที่เย็น ให้ระบายอากาศ ทำความชันอย่างน้อย 20% และทำฝ้าในห้องที่ชื้นมาก

 

หลังคา PVC ทำให้โรงเรือนมืดได้ไหม

ด้านล่างมาตรฐานเป็นสีขาวนม สั่งผลิตด้านล่างสีเข้มได้

 

Sources for the figures in this article

  • Profiles, 2.5–3.0 mm thickness and 10-year warranty: Santiago ASA/PVC product specification.
  • About 6–8 °C cooler than bare metal sheet and about 80% less rain noise: Santiago's own comparisons on finished roofs in Vietnam.
  • HS code 3925.90.00: Harmonized System Chapter 39 (builders' ware of plastics), as applied in Vietnam's export tariff.
  • Certificates of origin (Form D, AI, AK/VK, AJ/VJ, VC, CPTPP): issued by Vietnam's Ministry of Industry and Trade under the country's free trade agreements.
  • Minimum order of one 40 ft container (about 5,000 m) and about 5 days for production and loading: Santiago export desk, October 2026.

Updated 03/11/2026. Santiago Import Export Co., Ltd, Vietnam. WhatsApp +84 935 391 495 (Mr. Quyen), hotline +84 965 437 316 (Mrs. Ly), email salessantiagoroofing@gmail.com.