Plastic Roofing That Looks Like Tiles (and What About Slate?)
Plastic roofing that looks like tiles: how PVC roof tile panels read from the street and up close, what about a slate look, and a 100 m² worked example.
14Nov/2026
What Is PVC Roofing? Rigid PVC Roof Sheets vs PVC and TPO Membranes
Is PVC roofing the same as TPO? Is it single ply? "PVC roofing" means two products: flexible membranes for flat roofs and rigid UPVC sheets for pitched roofs.
14Nov/2026
UPVC Roofing Sheets: Advantages and Disadvantages by Building Type
UPVC roofing sheets pros and cons for houses, farms, shops and factories in hot countries: which disadvantages are deal-breakers and which are just planning.
14Nov/2026
Heat Resistant Roofing Sheet: Which Roof Sheet Is Best for a Hot Climate?
Which roof sheet is best for a hot climate? ASA/PVC sheets keep rooms 6 – 8 °C cooler than bare metal and hold their colour in hard sun. What else cuts roof heat.
14Nov/2026
Plastic Roof Tiles Price per m²: How to Work Out the Real Cost of a Roof
Turn a per-metre or per-sheet quote for plastic roof tiles into a cost per m² of roof: cover width, slope, 219 mm rounding, accessories, freight. 100 m² example.
14Nov/2026
Plastic Roof Tiles for a Conservatory, Porch or Single-Storey Extension
A lightweight ASA/PVC tile sheet gives a conservatory, porch or extension a tiled look at about 5.4 kg/m². Frame check, rules and a 3 × 4 m lean-to example.
14Nov/2026
UPVC Roofing Sheet from China or Vietnam? What to Compare Between Suppliers
Comparing UPVC roofing sheet makers in China and Vietnam? Check the same points with every supplier: thickness, ASA layer, samples, origin, MOQ, lead time.
14Nov/2026
Replacing Asbestos Roof Sheets with ASA/PVC: The Right Order of Work
Old asbestos-cement roof? Licensed removal comes first, then a frame check, purlins under 700 mm and new ASA/PVC sheets. Steps and a 73 m² sheet list.
14Nov/2026
Plastic Roof Sheets 10 mm, 12 mm or 16 mm? What the Thickness Figure Means
A 10 mm or 16 mm plastic roof sheet is usually a hollow multiwall panel. A solid ASA/PVC roof sheet is 2.5 – 3.0 mm. How to read listings and measure a cut edge.
14Nov/2026
How to Cut PVC Roofing Sheets: Ordering to Size, Tools, Marking and Safety
Order Santiago ASA/PVC sheets cut to size in 219 mm steps, then trim on site with shears, a fine-tooth saw or a fine-blade grinder. Marking, 6 mm holes, safety.
14Nov/2026
Minimum Pitch for PVC Roofing: the 20% Slope Rule and a Conversion Table
Corrugated plastic roofing pitch: Santiago ASA/PVC sheets need a 20 – 45% slope, about 11 – 24°. Table of %, degrees and x-in-12 with lean-to and gable examples.
14Nov/2026
Corrugated PVC Roofing Sheets: 5, 6 or 11 Waves for Factories, Farms and Sheds
Corrugated plastic roof panels from Santiago come with 5, 6 or 11 waves. Sizes, wave heights, a barn roof worked example and when the tile profile fits better.